Reverse

Multipurpose and lightweight belayer-descender, which allows the belaying of the second (Reverso mode)

Multipurpose and ultralight, REVERSO is a belayer-descender intended for climbing at crags or on multi-pitch routes and for mountaineering. Reverso mode allows belaying of one or two seconds. Suitable for most rope diameters: single rope from 8.5 to 10.5 mm, half rope from 7.1 to 9.2 mm and twin rope from 6.9 to 9.2 mm. The specific design of the rope passage facilitates its sliding in the device, protecting it from wear.

Detailed description

Versatility and ease of use:
- classic belay technique with both hands on the rope,
- fluidity of the rope sliding in the device,
- allows you to make rappel descents,
- Reverso mode for belaying one or two seconds on multi-pitch routes,
- independent and simultaneous two-second belay in Reverso mode,
- release hole that allows you to progressively give rope with a simple carabiner, when the device is under tension,
- installation drawings engraved on the belay (for belay and Reverso mode).
Suitable for all rope diameters:
- control of the braking action, thanks to the grooved V-shaped braking grooves,
- compatible with dynamic single ropes from 8.5 to 10.5 mm (11 mm possible depending on the flexibility of the rope),
- compatible with dynamic half ropes with a diameter between 7.1 and 9.2 mm.
- compatible with dynamic twin ropes with a diameter between 6.9 and 9.2 mm.
Strength and lightness:
- reinforced resistance, thanks to the rounded design of the rope passage, which reduces wear on the device,
- compact and ultralight: only 57 g.
Specifications
Weight: 57g
Rope compatibility: single rope from 8.5 to 10.5 mm, half rope from 7.1 to 9.2 mm and twin rope from 6.9 to 9.2 mm
Materials: aluminum body
Certification(s): EN 15151-2, UIAA